Buyer answer: A calculation and testing guide for comparing portable power banks in B2B procurement.
Capacity has more than one meaning
A power bank’s printed mAh rating commonly refers to the nominal capacity of its internal battery cells at their nominal voltage, not the milliamp-hours delivered at a 5V USB port. The useful energy available to a connected device is lower than the nominal stored energy because of conversion losses, cable losses and protection/operating limits.
Watt-hours offer a more useful basis for comparing battery energy. For a simplified lithium-ion example: 10,000mAh x 3.7V / 1,000 = 37Wh. This calculation assumes the quoted mAh belongs to a pack with an appropriate nominal voltage of 3.7V; check the actual cell chemistry and pack arrangement. It is not an assertion that a 10,000mAh product can deliver 37Wh at a USB output.
Why a phone may charge fewer times than expected
A power bank must convert internal battery voltage to the port output, and the phone converts received energy again while using power for its own electronics. Delivery depends on conversion efficiency, cable resistance, port voltage, ambient temperature and the phone’s state of charge. Manufacturers may also define cut-off thresholds differently.
| Term | What it describes |
|---|---|
| Cell capacity (mAh) | Electrical charge at a stated cell/pack voltage |
| Nominal energy (Wh) | Approximate stored energy at nominal voltage |
| USB output rating (W) | Maximum specified power under a defined profile |
| Delivered energy (Wh) | Measured energy supplied during a defined discharge test |
| Recharge time | Depends on supported input, adapter, losses and temperature |
What to request from suppliers
Ask for cell type, cell count/arrangement, rated capacity, nominal energy, supported input and output profiles, battery protection information, and an appropriate test procedure. For retail claims, require a test setup specifying load, output voltage, starting condition and cut-off condition. Do not derive battery life or number of phone charges from headline capacity alone.
Branding and airline questions
For shipping and travel, the relevant energy figure is typically expressed in watt-hours, but restrictions depend on the transport mode and applicable rules. Passenger-carry rules and commercial cargo rules are not interchangeable. Obtain written battery transport documentation for the exact configuration.
For additional procurement points read our existing power bank sourcing checklist or compare power bank models.
Common buyer questions
Is 10,000mAh the USB output capacity?
Usually it refers to cell-side capacity at a nominal cell voltage. Convert to Wh and measure output separately.
Can Wh be calculated from mAh alone?
No. The relevant nominal voltage is also required, along with correct interpretation of the cell or pack rating.
Related ChargerNext reading
- Power Bank Shipping Documents and UN 38.3: 2026 Guide
- Built-In Cable Power Banks: Durability and Connector Tests
- Browse the Charging Knowledge Center
Official references and further reading
Editorial note: This is B2B sourcing guidance, not a product certification, laboratory report, legal opinion or guarantee of model-level performance. Confirm the exact model, current source requirements and destination-market rules before purchase.
